Looking back through the archives I see this was an issue for someone
back in 2005. I've added the suggested multicastSendOnly() call to the
outbound groupsock, but I can't test it 'til tomorrow.
Interestingly, I tested on Mac OSX and Linux and both had the same
issues as regards playback on the new multicast address.
On 6 Apr 2009, at 16:15, Glen Gray wrote:
Hey guys,
I'm looking around at the samples in testProgs and interested in
using some techniques on a small project. I've had some problems in
getting the testProgs/testRelay app working sufficently.
Basically, I've got an off the shelf TV encoder that broadcasts
MPEG2-TS onto the network. I used testRelay to read the source
address and relay it to another address. I've got VLC running on
another box on the same LAN with two play list items, one pointing
to the original broadcast address and the other to the relayed
address. Original plays fine, relayed one is corrupted badly with
lots of "libdvbpsi error (PSI decoder): TS discontinuity (received
14, expected 12) for PID 17" type messages appearing in the logs.
I'm looking for some tips on how to test this testProgs/testRelay so
that I can get a working stream relayed to another address.
Thanks in advance,
--
Glen Gray
sla...@slaine.org
_______________________________________________
live-devel mailing list
live-devel@lists.live555.com
http://lists.live555.com/mailman/listinfo/live-devel
--
Glen Gray
sla...@slaine.org
_______________________________________________
live-devel mailing list
live-devel@lists.live555.com
http://lists.live555.com/mailman/listinfo/live-devel
