>> Because your input device returns discrete MPEG-4 video frames, rather than a byte stream, it'd be better if you used "MPEG4VideoStreamDiscreteFramer", rather than "MPEG4VideoStreamFramer".
That did the trick, I streamed for 30 min without one single error !!! Thanks a ton. Mit freundlichen Grüßen / Best regards Kumar Bala (Software Developer and System Designer) DSP-Weuffen Software/Hardware für DSP- und MCP-Konzeption und Optimierung ihres Systems DSP-Weuffen GmbH Schomburger Strasse 11 88279 Amtzell Tel: +49 7520 / 96673 - 146 Fax: +49 7520 / 96673 - 124 Mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> Web: http://www.dsp-weuffen.de <http://www.dsp-weuffen.de/> Geschäftsführer: Dieter Weuffen | Amtsgericht 89014 ULM | HR-NR: HRB621135 Bitte beachten Sie, dass diese E-Mail einschließlich aller eventuell angehängten Dokumente vertrauliche und/oder rechtlich geschützte Informationen enthalten kann. Der Inhalt ist ausschließlich für den bezeichneten Adressaten bestimmt. Wenn Sie nicht der richtige Adressat oder dessen Vertreter sind, setzen Sie sich bitte mit dem Absender der E-Mail in Verbindung und löschen Sie die E-Mail sofort. Jede Form der Verwendung, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts fehlgeleiteter E-Mails ist unzulässig. Ross Finlayson wrote: >> I use the testOnDemandRTSPServer to stream live video (captured using >> an analog camera and encoded to MPEG 4 ES using a co-processor). I use >> ByteFileStreamSource.cpp in (ASYNCHRONOUS mode) as a base model for my >> device. I have modified doReadFromFile in such a way that it reurns an >> MPEG 4 frame from the "codec engine"(capture device + mpeg 4 encoder). > > Because your input device returns discrete MPEG-4 video frames, rather > than a byte stream, it'd be better if you used > "MPEG4VideoStreamDiscreteFramer", rather than "MPEG4VideoStreamFramer". > > However, your first test should have been using the *unmodified* > source code - to stream from a MPEG-4 Video Elementary Stream *file*. > I.e., you should have first created a file "test.m4e" - from the > output of your encoder - and then tried streaming this, using the > *unmodified* "testOnDemandRTSPServer" (or "testMPEG4VideoStreamer") > application. (In general, once you've modified the supplied code, you > can't expect to get much support on this mailing list.) > > I suspect that perhaps the output from your encoder is not in the > proper form - i.e., not a true MPEG-4 Video Elementary Stream. If you > this may be true, then please put your "test.m4e" file on a web > server, and send us the URL, so we can download and test this for > ourselves. _______________________________________________ live-devel mailing list live-devel@lists.live555.com http://lists.live555.com/mailman/listinfo/live-devel
