Hi, Software RTSP server / Hardware RTP streamer: I had worked on a similar setup. Streaming server cross compiled, running on ARM target and client running on Windows-XP (SP2)host. I am not completely sure what do you mean by Hardware RTP streamer. In my case it was a binary executable that used live555 library. And a receiver client application on Windows-xp, again using live555 library. ________________________________
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Vankrunkelsven, Tony (NSN - BE/Herentals) Sent: Thursday, April 17, 2008 1:57 PM To: [EMAIL PROTECTED] Subject: [Live-devel] RTSP server/client application Hi All, Is it possible to use the LIVE555 Streaming Media <http://www.live555.com/liveMedia/> libraries for the following two applications: 1) Software RTSP server / Hardware RTP streamer: There is a host handling all RTSP/RTCP related issues like connection setup, session control, RTP streaming control of dedicated hardware, .... The hardware can generate multiple streams at high bitrates and can be controlled by the host with a dedicated interface. So the RTP stream is directly send by the hardware. The data doesn't pass at all through the host. Basically the host is the RTSP server and the RTP server is done in hardware. Can only the RTSP server part of the library be used without having the real stream available at the host? And can a dedicated interface to the hardware be added for setting parameters like (RTP payload type, port number, IP number, ....)? 2) Software RTSP client / Hardware RTP receiver: Similar as the server but then the host runs only a RTSP client and the hardware can receive multiple streams at high bitrates. Regards, Tony Vankrunkelsven Design Engineer * +32 14 25 27 44 Fax +32 14 25 25 70 * [EMAIL PROTECTED] Nokia Siemens Networks n.v. Atealaan 34 B-2200 Herentals Belgium www.nokiasiemensnetworks.com <http://www.nokiasiemensnetworks.com/> SASKEN BUSINESS DISCLAIMER ------------------------- This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, Disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email
_______________________________________________ live-devel mailing list live-devel@lists.live555.com http://lists.live555.com/mailman/listinfo/live-devel
