On Sat Aug 15 02:23:50 2026 +0000, Steve Kaznak wrote:
> Add the Omnivision OV01A1B (ACPI HID OVTI01AB) to the
> ipu_supported_sensors[] table, with the same single 400 MHz link
> frequency as the OV01A10 and OV01A1S entries it shares a comment with.
>
> The sensor is the IR camera in the Dell XPS 13 Plus 9320, behind an
> Intel Vision Sensing Controller (IVSC). Commit 36eab90d3f4f ("media:
> i2c: ov01a10: Add ov01a1b support") added driver support for it, but
> without a bridge entry no fwnode graph endpoint is created, so the
> driver never binds and the camera is not enumerated.
>
> Tested on an XPS 13 Plus 9320: the sensor binds and streams 1296x816
> Y10 at 30 fps.
>
> Signed-off-by: Steve Kaznak <[email protected]>
> Reviewed-by: Mehdi Djait <[email protected]>
> Reviewed-by: Hans de Goede <[email protected]>
> Signed-off-by: Sakari Ailus <[email protected]>
Patch committed.
Thanks,
Sakari Ailus
drivers/media/pci/intel/ipu-bridge.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
---
diff --git a/drivers/media/pci/intel/ipu-bridge.c
b/drivers/media/pci/intel/ipu-bridge.c
index 7520bb950de6..952868ad8d5f 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -88,8 +88,9 @@ static const struct ipu_sensor_config ipu_supported_sensors[]
= {
IPU_SENSOR_CONFIG("INT3537", 1, 437000000),
/* Lontium lt6911uxe */
IPU_SENSOR_CONFIG("INTC10C5", 0),
- /* Omnivision OV01A10 / OV01A1S */
+ /* Omnivision OV01A10 / OV01A1B / OV01A1S */
IPU_SENSOR_CONFIG("OVTI01A0", 1, 400000000),
+ IPU_SENSOR_CONFIG("OVTI01AB", 1, 400000000),
IPU_SENSOR_CONFIG("OVTI01AS", 1, 400000000),
/* Omnivision OV02C10 */
IPU_SENSOR_CONFIG("OVTI02C1", 1, 400000000),
_______________________________________________
linuxtv-commits mailing list -- [email protected]
To unsubscribe send an email to [email protected]
