On Wed Jul 15 12:43:31 2026 +0100, Dave Stevenson wrote:
> In preparation for additional options in the PLL setup, compute
> the link frequency rather than using a hardcoded value.
> 
> Signed-off-by: Dave Stevenson <[email protected]>
> Signed-off-by: Sakari Ailus <[email protected]>

Patch committed.

Thanks,
Sakari Ailus

 drivers/media/i2c/imx355.c | 39 +++++++++++++++++----------------------
 1 file changed, 17 insertions(+), 22 deletions(-)

---

diff --git a/drivers/media/i2c/imx355.c b/drivers/media/i2c/imx355.c
index 3b3bf41485c2..d8f8efc0c927 100644
--- a/drivers/media/i2c/imx355.c
+++ b/drivers/media/i2c/imx355.c
@@ -29,7 +29,11 @@
 
 /* PLL registers that depend on the external clock frequency */
 #define IMX355_REG_EXTCLK_FREQ         CCI_REG16(0x0136)
+#define IMX355_REG_PLL_OP_PREDIV       CCI_REG8(0x030d)
 #define IMX355_REG_PLL_OP_MUL          CCI_REG16(0x030e)
+#define IMX355_REG_PLL_IVT_PCK_DIV     CCI_REG8(0x0301)
+#define IMX355_PLL_OP_PREDIV           2
+#define IMX355_PLL_IVT_PCK_DIV         5
 
 /* V_TIMING internal */
 #define IMX355_REG_FLL                 CCI_REG16(0x0340)
@@ -83,9 +87,6 @@
 /* Flip Control */
 #define IMX355_REG_ORIENTATION         CCI_REG8(0x0101)
 
-/* default link frequency and external clock */
-#define IMX355_LINK_FREQ_DEFAULT       360000000LL
-
 /* number of data lanes */
 #define IMX355_DATA_LANES              4
 
@@ -141,6 +142,7 @@ static const struct imx355_clk_params imx355_clk_params[] = 
{
 };
 
 struct imx355_hwcfg {
+       s64 link_freq_menu;
        unsigned long link_freq_bitmap;
 };
 
@@ -238,13 +240,13 @@ static const struct cci_reg_sequence imx355_global_regs[] 
= {
        { CCI_REG8(0x0112), 0x0a },
        { CCI_REG8(0x0113), 0x0a },
        { CCI_REG8(0x0114), 0x03 },
-       { CCI_REG8(0x0301), 0x05 },
+       { IMX355_REG_PLL_IVT_PCK_DIV, IMX355_PLL_IVT_PCK_DIV },
        { CCI_REG8(0x0303), 0x01 },
        { CCI_REG8(0x0305), 0x02 },
        { CCI_REG8(0x0306), 0x00 },
        { CCI_REG8(0x0307), 0x78 },
        { CCI_REG8(0x030b), 0x01 },
-       { CCI_REG8(0x030d), 0x02 },
+       { IMX355_REG_PLL_OP_PREDIV, IMX355_PLL_OP_PREDIV },
        { CCI_REG8(0x0310), 0x00 },
        { CCI_REG8(0x0220), 0x00 },
        { CCI_REG8(0x0222), 0x01 },
@@ -338,14 +340,6 @@ static const char * const imx355_test_pattern_menu[] = {
        "Pseudorandom Sequence (PN9)",
 };
 
-/*
- * When adding more than the one below, make sure the disallowed ones will
- * actually be disabled in the LINK_FREQ control.
- */
-static const s64 link_freq_menu_items[] = {
-       IMX355_LINK_FREQ_DEFAULT,
-};
-
 /* Mode configs */
 static const struct imx355_mode supported_modes[] = {
        {
@@ -1092,7 +1086,6 @@ static int imx355_init_controls(struct imx355 *imx355)
        s64 hblank;
        u64 pixel_rate;
        const struct imx355_mode *mode;
-       u32 max;
        int ret;
 
        ctrl_hdlr = &imx355->ctrl_handler;
@@ -1101,15 +1094,14 @@ static int imx355_init_controls(struct imx355 *imx355)
                return ret;
 
        ctrl_hdlr->lock = &imx355->mutex;
-       max = ARRAY_SIZE(link_freq_menu_items) - 1;
        imx355->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx355_ctrl_ops,
-                                                  V4L2_CID_LINK_FREQ, max, 0,
-                                                  link_freq_menu_items);
+                                                  V4L2_CID_LINK_FREQ, 0, 0,
+                                                  
&imx355->hwcfg->link_freq_menu);
        if (imx355->link_freq)
                imx355->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 
        /* pixel_rate = link_freq * 2 * nr_of_lanes / bits_per_sample */
-       pixel_rate = IMX355_LINK_FREQ_DEFAULT * 2 * 4;
+       pixel_rate = imx355->hwcfg->link_freq_menu * 2 * 4;
        do_div(pixel_rate, 10);
        /* By default, PIXEL_RATE is read only */
        v4l2_ctrl_new_std(ctrl_hdlr, &imx355_ctrl_ops, V4L2_CID_PIXEL_RATE,
@@ -1184,12 +1176,14 @@ error:
        return ret;
 }
 
-static struct imx355_hwcfg *imx355_get_hwcfg(struct device *dev)
+static struct imx355_hwcfg *imx355_get_hwcfg(struct imx355 *imx355)
 {
+       struct device *dev = imx355->dev;
        struct imx355_hwcfg *cfg;
        struct v4l2_fwnode_endpoint bus_cfg = {
                .bus_type = V4L2_MBUS_CSI2_DPHY
        };
+       const struct imx355_clk_params *clk = imx355->clk_params;
        struct fwnode_handle *ep;
        struct fwnode_handle *fwnode = dev_fwnode(dev);
        int ret;
@@ -1212,10 +1206,11 @@ static struct imx355_hwcfg *imx355_get_hwcfg(struct 
device *dev)
        if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX355_DATA_LANES)
                goto out_err;
 
+       cfg->link_freq_menu = (clk->ext_clk * clk->pll_op_mpy) /
+                             (IMX355_PLL_OP_PREDIV * 2);
        ret = v4l2_link_freq_to_bitmap(dev, bus_cfg.link_frequencies,
                                       bus_cfg.nr_of_link_frequencies,
-                                      link_freq_menu_items,
-                                      ARRAY_SIZE(link_freq_menu_items),
+                                      &cfg->link_freq_menu, 1,
                                       &cfg->link_freq_bitmap);
        if (ret)
                goto out_err;
@@ -1286,7 +1281,7 @@ static int imx355_probe(struct i2c_client *client)
        /* Initialize subdev */
        v4l2_i2c_subdev_init(&imx355->sd, client, &imx355_subdev_ops);
 
-       imx355->hwcfg = imx355_get_hwcfg(imx355->dev);
+       imx355->hwcfg = imx355_get_hwcfg(imx355);
        if (!imx355->hwcfg) {
                dev_err(imx355->dev, "failed to get hwcfg");
                ret = -ENODEV;
_______________________________________________
linuxtv-commits mailing list -- [email protected]
To unsubscribe send an email to [email protected]

Reply via email to