On Wed May 20 17:30:06 2026 +0530, Rishikesh Donadkar wrote:
> j721e-csi2rx driver has a limitation of frame width being a multiple
> word size. However, there is no such limitation imposed by the
> hardware [1].
> 
> Remove this limitation from the driver.
> 
> Link: https://www.ti.com/lit/pdf/spruj16
> Reviewed-by: Yemike Abhilash Chandra <[email protected]>
> Reviewed-by: Tomi Valkeinen <[email protected]>
> Signed-off-by: Rishikesh Donadkar <[email protected]>
> Signed-off-by: Sakari Ailus <[email protected]>

Patch committed.

Thanks,
Sakari Ailus

 .../media/platform/ti/j721e-csi2rx/j721e-csi2rx.c  | 24 ++++------------------
 1 file changed, 4 insertions(+), 20 deletions(-)

---

diff --git a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c 
b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
index b75aa363d1bf..710d05a05353 100644
--- a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
+++ b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
@@ -43,7 +43,6 @@
 #define SHIM_PSI_CFG0_DST_TAG          GENMASK(31, 16)
 
 #define TI_CSI2RX_MAX_PIX_PER_CLK      4
-#define PSIL_WORD_SIZE_BYTES           16
 /*
  * There are no hard limits on the width or height. The DMA engine can handle
  * all sizes. The max width and height are arbitrary numbers for this driver.
@@ -250,19 +249,12 @@ static void ti_csi2rx_fill_fmt(const struct ti_csi2rx_fmt 
*csi_fmt,
                               struct v4l2_format *v4l2_fmt)
 {
        struct v4l2_pix_format *pix = &v4l2_fmt->fmt.pix;
-       unsigned int pixels_in_word;
-
-       pixels_in_word = PSIL_WORD_SIZE_BYTES * 8 / csi_fmt->bpp;
 
        /* Clamp width and height to sensible maximums (16K x 16K) */
        pix->width = clamp_t(unsigned int, pix->width,
-                            pixels_in_word,
-                            MAX_WIDTH_BYTES * 8 / csi_fmt->bpp);
+                            1, MAX_WIDTH_BYTES * 8 / csi_fmt->bpp);
        pix->height = clamp_t(unsigned int, pix->height, 1, MAX_HEIGHT_LINES);
 
-       /* Width should be a multiple of transfer word-size */
-       pix->width = rounddown(pix->width, pixels_in_word);
-
        v4l2_fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
        pix->pixelformat = csi_fmt->fourcc;
        pix->bytesperline = pix->width * (csi_fmt->bpp / 8);
@@ -360,23 +352,15 @@ static int ti_csi2rx_enum_framesizes(struct file *file, 
void *fh,
                                     struct v4l2_frmsizeenum *fsize)
 {
        const struct ti_csi2rx_fmt *fmt;
-       unsigned int pixels_in_word;
 
        fmt = find_format_by_fourcc(fsize->pixel_format);
        if (!fmt || fsize->index != 0)
                return -EINVAL;
 
-       /*
-        * Number of pixels in one PSI-L word. The transfer happens in multiples
-        * of PSI-L word sizes.
-        */
-       pixels_in_word = PSIL_WORD_SIZE_BYTES * 8 / fmt->bpp;
-
        fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
-       fsize->stepwise.min_width = pixels_in_word;
-       fsize->stepwise.max_width = rounddown(MAX_WIDTH_BYTES * 8 / fmt->bpp,
-                                             pixels_in_word);
-       fsize->stepwise.step_width = pixels_in_word;
+       fsize->stepwise.min_width = 1;
+       fsize->stepwise.max_width = MAX_WIDTH_BYTES * 8 / fmt->bpp;
+       fsize->stepwise.step_width = 1;
        fsize->stepwise.min_height = 1;
        fsize->stepwise.max_height = MAX_HEIGHT_LINES;
        fsize->stepwise.step_height = 1;
_______________________________________________
linuxtv-commits mailing list -- [email protected]
To unsubscribe send an email to [email protected]

Reply via email to