On Wed May 6 09:48:44 2026 +0300, Svyatoslav Ryhel wrote:
> Pass the device's own mutex lock to the control handler so that the media
> framework can handle control access instead of managing it manually. The
> lock must be common to both sub-devices since they share same hardware,
> so the individual sub-device locks will not work here.
>
> Signed-off-by: Svyatoslav Ryhel <[email protected]>
> Signed-off-by: Sakari Ailus <[email protected]>
Patch committed.
Thanks,
Sakari Ailus
drivers/media/i2c/lm3560.c | 19 ++++++-------------
1 file changed, 6 insertions(+), 13 deletions(-)
---
diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c
index edfb07587cab..5b568ed9536b 100644
--- a/drivers/media/i2c/lm3560.c
+++ b/drivers/media/i2c/lm3560.c
@@ -162,14 +162,12 @@ static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum
lm3560_led_id led_no)
struct lm3560_flash *flash = to_lm3560_flash(ctrl, led_no);
int rval = -EINVAL;
- mutex_lock(&flash->lock);
-
if (ctrl->id == V4L2_CID_FLASH_FAULT) {
s32 fault = 0;
unsigned int reg_val;
rval = regmap_read(flash->regmap, REG_FLAG, ®_val);
if (rval < 0)
- goto out;
+ return rval;
if (reg_val & FAULT_SHORT_CIRCUIT)
fault |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
if (reg_val & FAULT_OVERTEMP)
@@ -179,8 +177,6 @@ static int lm3560_get_ctrl(struct v4l2_ctrl *ctrl, enum
lm3560_led_id led_no)
ctrl->cur.val = fault;
}
-out:
- mutex_unlock(&flash->lock);
return rval;
}
@@ -190,8 +186,6 @@ static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum
lm3560_led_id led_no)
u8 tout_bits;
int rval = -EINVAL;
- mutex_lock(&flash->lock);
-
switch (ctrl->id) {
case V4L2_CID_FLASH_LED_MODE:
flash->led_mode = ctrl->val;
@@ -202,14 +196,12 @@ static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum
lm3560_led_id led_no)
case V4L2_CID_FLASH_STROBE_SOURCE:
rval = regmap_update_bits(flash->regmap,
REG_CONFIG1, 0x04, (ctrl->val) << 2);
- if (rval < 0)
- goto err_out;
break;
case V4L2_CID_FLASH_STROBE:
if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
rval = -EBUSY;
- goto err_out;
+ break;
}
flash->led_mode = V4L2_FLASH_LED_MODE_FLASH;
rval = lm3560_mode_ctrl(flash);
@@ -218,7 +210,7 @@ static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum
lm3560_led_id led_no)
case V4L2_CID_FLASH_STROBE_STOP:
if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
rval = -EBUSY;
- goto err_out;
+ break;
}
flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
rval = lm3560_mode_ctrl(flash);
@@ -239,8 +231,6 @@ static int lm3560_set_ctrl(struct v4l2_ctrl *ctrl, enum
lm3560_led_id led_no)
break;
}
-err_out:
- mutex_unlock(&flash->lock);
return rval;
}
@@ -328,6 +318,8 @@ static int lm3560_init_controls(struct lm3560_flash *flash,
if (fault != NULL)
fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
+ hdl->lock = &flash->lock;
+
if (hdl->error)
return hdl->error;
@@ -363,6 +355,7 @@ static int lm3560_subdev_init(struct lm3560_flash *flash,
if (rval < 0)
goto err_out;
flash->subdev_led[led_no].entity.function = MEDIA_ENT_F_FLASH;
+ flash->subdev_led[led_no].state_lock = &flash->lock;
rval = v4l2_async_register_subdev(&flash->subdev_led[led_no]);
if (rval < 0) {
_______________________________________________
linuxtv-commits mailing list -- [email protected]
To unsubscribe send an email to [email protected]