--- Gio 4/9/08, Detlev Zundel <[EMAIL PROTECTED]> ha scritto: > Da: Detlev Zundel <[EMAIL PROTECTED]> > Oggetto: Re: Boot 2.6.26 (or similar) on mpc5200 using powerpc > A: [email protected] > Data: Giovedì 4 settembre 2008, 14:05 > Hi Angelo, > > > Does anyone boots on mpc5200 board, the linux kernel > 2.6.26 (or .24 .25) using > > ARCH=powerpc? > > Sure, many people do this successfully. > > > Looking on web i known that it's very different > from ppc mode and the right > > procedure to follow is: > > > > 1 - make lite5200b_defconfig ARCH=powerpc > CROSS_COMPILE=powerpc-linux-gnu- > > Note that this changes to "make > 52xx/lite5200b_defconfig ..." in recent kernels.
Ok. I use 52xx/lite5200b_defconfig. > > > 2 - make cuImage.lite5200b ARCH=powerpc > CROSS_COMPILE=powerpc-linux-gnu- > > Well, this is debatable. Here you explicitely request a > backward > compatability wrapped uImage (for firmwares being FDT > ignorant): > Can i use also $ make uImage ... ?! Or only cuImage!? > > The output of second command is: > > ... > > CHK include/linux/version.h > > CHK include/linux/utsrelease.h > > CALL scripts/checksyscalls.sh > > CHK include/linux/compile.h > > CALL arch/powerpc/kernel/systbl_chk.sh > > CALL arch/powerpc/kernel/prom_init_check.sh > > arch/powerpc/boot/dtc -O dtb -o > arch/powerpc/boot/lite5200b.dtb -b 0 /home/ > > > asimmini/Scrivania/linux-2.6.26.3/arch/powerpc/boot/dts/lite5200b.dts > > DTC: dts->dtb on file > "/home/asimmini/Scrivania/linux-2.6.26.3/arch/powerpc/ > > boot/dts/lite5200b.dts" > > WRAP arch/powerpc/boot/cuImage.lite5200b > > ^---- Here the wrapper gets added. > > > Image Name: Linux-2.6.26.3 > > Created: Wed Sep 3 15:56:16 2008 > > Image Type: PowerPC Linux Kernel Image (gzip > compressed) > > Data Size: 1597696 Bytes = 1560.25 kB = 1.52 MB > > Load Address: 0x00400000 > > Entry Point: 0x00400550 > > rm arch/powerpc/boot/lite5200b.dtb > > > > But, at this point, if i crosscompile in ppc mode i > had to modify the Load > > Address wiht the mkimage tool because the SDRAM at the > Bootloader time starts > > from 0xF8000000, while the uImage has a Load Address > and Entry Point at > > 0x00000000. > > Well still in newer kernels, uImage has load and entry > address 0. Its > only the cuImage.lite5200b (and I presume other wrapped > kernels) that > have this load address. > > > What should i do in powerpc mode?? > > I suggest that you use a recent U-Boot on your board which > can > explicitely pass a .dtb to the kernel and use a plain > uImage + flat > device tree blob. I gather this is the best tested > combination. I > myself saw problems with the wrapped image that went away > when passing > the device tree explicitely. > > So in 2.6.26 I'd advise you to do a "make > uImage" + "make lite5200b.dtb" > and use the results in a recent U-Boot. But lite5200b.dtb doesn't exist. So i'm looking for it and i known that i had to generate it using this command: $ arch/powerpc/boot/dtc -b0 -Idts -Odtb -V16 arch/powerpc/boot/dts/lite5200b.dts > lite5200b.dtb I'm wrong?! So at this point i've got dtb, but somwhere i saw that it's necessary to download lite5200.dtb to the system... And at this point I try to boot the board: 1. usb start 2. usb scan 3. fatload usb 0 0xfc000000 cuImage.lite5200b (3. fatload usb 0 0xfc000000 uImage - if i use make uImage) 4. fatload usb 0 0xfd000000 rootfs.uimage 5. fatload usb 0 0x???????? lite5200b.dtb 6. bootm 0xfc000000 0x???????? However my uboot version is 1.2.0. Many thanks. __________________________________________________ Do You Yahoo!? Poco spazio e tanto spam? Yahoo! Mail ti protegge dallo spam e ti da tanto spazio gratuito per i tuoi file e i messaggi http://mail.yahoo.it _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
