Dear Pieter, In message <[EMAIL PROTECTED]> you wrote: > > Im using a ppc85xx processor with Denx ELDK (4.1) The board has 512MB > DDR2 and the board config reserves 64M for pram. during bootup the > mem=$mem argument is passed to the linux kernel command line and linux > boots successfully.
So what are the exact boot messages of your kernel? > I am unable to mount the PRAMFS - all documentation leads me to use > > mount -t pramfs -o physaddr=0x1c000000,init=0x4000000 none /mnt -------------------------------------------------------------^^^^ > witch fails with the message: > mounting none on /mtd failed: no such devise -------------------^^^^ /mnt != /mtd There is something worng, probably your description. It would be better if you showed the precise commands and outpout from your target system. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED] "Open the pod bay doors, HAL." - Dave Bowman, 2001 _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
