Zhivko Yordanov ha scritto:
Hi all,
I have a PowerPC embedded board with CPU 7448 and Chipset Marvell 64560.
Till now, on board runs U-boot 1.1.2 and Linux kernel 2.6.12, with patches
from Marvell.
I ported the Marvell patch to Linux 2.6.26, but I can't start it. Now I'm
searching for the problem. Is this possible with old u-boot (1.1.2) to start
new versions of Linux kernel, or I need to port u-boot too?
Best regards,
Zhivko Yordanov
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
Have you wrote the dts file? I suggest you to change Uboot, 1.1.2 is
pretty old and if I remember correctly it doesn't support the dts, so
you should build a cuImage with the dts embedded in the kernel.
--
Marco Stornelli
Embedded Software Engineer
CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni
http://www.coritel.it
[EMAIL PROTECTED]
+39 06 72582838
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
