Hi,
I have put xilinx kernel on my board : a memec FX12 based on a Virtex 4 FX.
Everything thing is OK, I have my serial console, Ethernet is also OK.
I have to make some drivers. For example one for the LCD screen. It is my
first driver so I want to try with something easier like LEDs. I know there
is a driver from Xilinx but I want to do it by myself. Moreover it is only a
file to adapt Xilinx standelone driver for Kernel.
I try to read and to write the registers of my GPIO IP which is working, I
have made some tests in standelone. How accessing to these registers ?
I have tried with this for example but without success :
ptr = ioremap_nocache(0x70001e00,0x00000004);
printk("GPIO_DATA (readl): %u\n",readl(ptr));
readl, outl, ioread32 : same result.
Thanks
Best Regards
--
Ludovic Desroches
Ingénieur ESIEE 2008
mobile : 06 19 21 02 08
http://www.odulo.net
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
