Steve,
Yes, this fixed that problem. the following is now printed when
booting the kernel.
[ 5.866230] icap icap.0: Xilinx icap port driver
[ 5.866401] icap icap.0: ioremap 40200000 to c5000000 with size 10000
The icap is at address 0x40200000 on my system, so that seems correct.
However, when I copy partial bitstreams to the device, I get strange
results. Here is what I am seeing.
# mknod /dev/icap c 259 0
# cp opb_prr_0_lin_partial.bit /dev/icap
cp: write error: Bad address
# cp opb_prr_0_lin_partial.bit /dev/icap
[ 66.566107] icap icap.0: Failed to open file#
# cp opb_prr_0_lin_partial.bit /dev/icap
#
I know that this file exists in the current directory, and is a
working partial bitstream.
Thanks for the help.
Will
On Wed, May 14, 2008 at 2:37 PM, Stephen Neuendorffer
<[EMAIL PROTECTED]> wrote:
>
> I bet you're using ARCH ppc...
>
> It looks like in arch/ppc/syslib/virtex_devices.c:
>
> #define XPAR_HWICAP(num) { \
> .name = "xilinx_icap", \
>
> Should probably be:
>
> #define XPAR_HWICAP(num) { \
> .name = "icap", \
>
> now.
>
> Can you make this change locally and verify that it solves the problem?
>
> Steve
>
>> -----Original Message-----
>> From: [EMAIL PROTECTED]
> [mailto:linuxppc-embedded-
>> [EMAIL PROTECTED] On Behalf Of Will
> Kritikos
>> Sent: Wednesday, May 14, 2008 9:03 AM
>> To: [email protected]
>> Subject: xilinx_hwicap driver problems
>>
>> I am having some trouble using the xilinx_hwicap driver in Linux.
>> I am using version 2.6.24-rc8-xlnx of the Linux kernel from the Xilinx
>> GIT repository.
>> The xilinx_hwicap driver is statically compiled in - not a loadable
> module.
>> I am using the opb_hwicap device on a V4FX60 FPGA, Linux running on
> the PPC405.
>>
>> The driver successfully is initialized on boot - I added a printk to
>> the init function to verify this. However, as far as I can tell, the
>> probe function is never called. There is nothing in dmesg from the
>> icap driver.
>>
>> After boot, the following files exist in /sys
>>
>> /sys/bus/platform/xilinx_icap.0
>> /sys/bus/platform/drivers/icap/bind
>> /sys/bus/platform/drivers/icap/uevent
>> /sys/bus/platform/drivers/icap/unbind
>> /sys/devices/platform/xilinx_icap.0
>>
>> I can make a device node /dev/icap, major number 259 minor number 0,
>> and copy partial bitstreams to it, but again nothing happens, and no
>> output in dmesg.
>>
>> Any help is appreciated. I am probably overlooking something simple.
>>
>> Thanks,
>> Will Kritikos
>> _______________________________________________
>> Linuxppc-embedded mailing list
>> [email protected]
>> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>
>
> This email and any attachments are intended for the sole use of the named
> recipient(s) and contain(s) confidential information that may be proprietary,
> privileged or copyrighted under applicable law. If you are not the intended
> recipient, do not read, copy, or forward this email message or any
> attachments. Delete this email message and any attachments immediately.
>
>
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
