Sounds like it's not finding the console. If you're using the uartlite, you need to specify console=ttyUL0 on the kernel command line.
Steve > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:linuxppc-embedded- > [EMAIL PROTECTED] On Behalf Of Dr. Peter Hartmann > Sent: Thursday, May 08, 2008 6:56 AM > To: [email protected] > Subject: xilinx linux on a XUPV2P > > Hello everybody, > > I am trying to get the latest Kernel (2.6.25-rc9) from git.xilinx.com running on > a XUPV2P board. I generated the hardware using JH Kelms step by step list, > skipping points 6-8 and replacing point 9 by a more modern version of doing > this. When I boot the system.ace from the CF card, the bootloader talks to me > over the RS232, but as soon as it tries to boot the kernel it hangs up. > I had 2.6.18-rc3 which I got from somebody else running this way. The reason I > intend to change is the UARTLITE driver, which seems to be included in the > latest kernel tree. > I use Platform Studio 9.1.02i which I also used for the 2.6.18 Kernel. > Has anybody yet got this to work out with 9.1.02i ?? > Would it be possible for somebody to give a dummy like me the steps you took to > get it working on your board? I'm really lost here. Thanks! > > > Thanks in advance! _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
