Hi!
There was a sugestion to change slab to slub alocation method... I
don't know quite well yet what is necessary to do this, but it seems that the
current implementation of slub is more commonly available on 2.6 kernels, not
in 2.4 that I use :(...
Any guesses or hints on this?
Regards!
Filipe.
-----Original Message-----
From: ext Gerhard Pircher [mailto:[EMAIL PROTECTED]
Sent: quarta-feira, 30 de Abril de 2008 13:26
To: Franca, Jose (NSN - PT/Portugal - MiniMD); Scott Wood
Cc: [email protected]; [EMAIL PROTECTED]
Subject: Re: FW: SKB corruption on heavy traffic
Hi,
I think I have the same problem here with all versions of the 2.6.x kernel
series (tested with kernel v2.6.8/14/16/18/25 on a PPC7455 machine with
different PCI network cards by transferring a big file over NFS/SCP). Data
corruption occurs under high load, but I don't get any kernel oops.
regards,
Gerhard
-------- Original-Nachricht --------
> Datum: Wed, 30 Apr 2008 10:07:15 +0100
> Von: "Franca, Jose (NSN - PT/Portugal - MiniMD)" <[EMAIL PROTECTED]>
> An: [EMAIL PROTECTED], [email protected]
> Betreff: FW: SKB corruption on heavy traffic
> >From our latest debugs we found that the problem occurs mainly on skbuff
> code. After some variable time kfree or kalloc result in kernel oops.
>
> -----Original Message-----
> From: Franca, Jose (NSN - PT/Portugal - MiniMD)
> Sent: quarta-feira, 30 de Abril de 2008 9:44
> To: 'ext Scott Wood'
> Cc:
> Subject: RE: SKB corruption on heavy traffic
>
> Hello!
>
> Thank you for replying!
> It't quite dificult to say if the problem exists without our
> changes, since the all software is dependent on this changes so to work
> with the hardware. I can't answer to that right now on that, but I forgot
> to add one thing: we have ring buffer full problems on our fcc_enet
> driver from time to time. So, I think the problem could be on linux
> configurations (related to hw) because there is a lot of posts on the web
> related to problems similar to this (none of them has really solved the
> bottom problem).
>
> Regards,
> Filipe
>
> -----Original Message-----
> From: ext Scott Wood [mailto:[EMAIL PROTECTED]
> Sent: terça-feira, 29 de Abril de 2008 20:15
> To: Franca, Jose (NSN - PT/Portugal - MiniMD)
> Cc: [EMAIL PROTECTED]; [email protected]
> Subject: Re: SKB corruption on heavy traffic
>
> On Tue, Apr 29, 2008 at 07:39:07PM +0100, Franca, Jose (NSN - PT/Portugal
> - MiniMD) wrote:
> > We are developing a MPC8247 based telecom board (512MB), using
> > linux 2.4 with some proprietary changes on IP stack and we are facing
> > some problems when we have heavy traffic on our Ethernet interfaces...
>
> Do you see these problems without the proprietary changes, and with a
> current kernel?
>
> -Scott
--
Psst! Geheimtipp: Online Games kostenlos spielen bei den GMX Free Games!
http://games.entertainment.gmx.net/de/entertainment/games/free
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
