Hi, everybody, my xparameters_ml300.h does not include 'XPAR_PLB_CLOCK_FREQ_HZ'.
CC arch/ppc/boot/simple/embed_config.o arch/ppc/boot/simple/embed_config.c: In function 'embed_config': arch/ppc/boot/simple/embed_config.c:781: error: 'XPAR_PLB_CLOCK_FREQ_HZ' undeclared (first use in this function) arch/ppc/boot/simple/embed_config.c:781: error: (Each undeclared identifier is reported only once arch/ppc/boot/simple/embed_config.c:781: error: for each function it appears in.) make[2]: ** [arch/ppc/boot/simple/embed_config.o] Erro 1 make[1]: ** [simple] Erro 2 make: ** [zImage] Erro 2 Can I replace 'XPAR_PLB_CLOCK_FREQ_HZ' for XPAR_CORE_CLOCK_FREQ_HZ/3 knowing that my MHS file description is: # Processor clock frequency: 300.000000 MHz # Bus clock frequency: 100.000000 MHz MHS FILE: # ############################################################################## # Created by Base System Builder Wizard for Xilinx EDK 9.1 Build EDK_J.19 # Thu Apr 3 17:07:17 2008 # Target Board: Xilinx XUP Virtex-II Pro Development System Rev C # Family: virtex2p # Device: xc2vp30 # Package: ff896 # Speed Grade: -7 # Processor: PPC 405 # Processor clock frequency: 300.000000 MHz # Bus clock frequency: 100.000000 MHz # Debug interface: FPGA JTAG # On Chip Memory : 128 KB # Total Off Chip Memory : 512 MB # - DDR_SDRAM_64Mx64 Dual Rank = 256 MB # - DDR_512MB_64Mx64_rank2_row13_col10_cl2_5 = 256 MB # ############################################################################## regards, rodolfo _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
