Hi Grant likely, I got kernel 2.6.20 from kernel.org and I want boot it on XUP Virtex II Pro University board. I edited the Makefile putting: ARCH? = ppc CROSS_COMPILE? = ppc_4xx- But I can't see anything about SystemACE driver on make menuconfig from this Kernel. How can I add SystemACE controler?
I compiled the kernel repeatedly generating a file zImage.elf. I used this file with the genace.tcl from Xilinx and this opt file: -jprog -board user -target ppc_hw -hw implementation/download.bit -elf zImage.elf -configdevice devicenr 1 idcode 0x1127e093 irlength 14 partname xc2vp30 -debugdevice devicenr 1 cpunr 1 -ace system.ace to generated ace file and put it in FAT16 partition of CF card, like a lot of references in web. But it doesn't works! Which IP cores must be present in my project of the EDK? Still speaking in the EDK Did i have to mark bram with ppc_405_0_bootloop? Did I have to mark bram whit any software project? My work in with Linux on Virtex don't work. I am almost dropping... Thanks!! _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
