> -----Original Message-----
> From: Joakim Tjernlund [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, March 18, 2008 5:47 PM
> To: Netdev; Li Yang; [email protected]
> Cc: Joakim Tjernlund
> Subject: [PATCH] Add Fixed PHY support for ucc_geth
>
> The new Fixed PHY method, fixed-link property, isn't
> impl. for ucc_geth which makes fixed PHYs non functional.
> Add support for the new method to restore the Fixed PHY
> functionality.
>
> Signed-off-by: Joakim Tjernlund <[EMAIL PROTECTED]>
Signed-off-by: Li Yang <[EMAIL PROTECTED]>
---
Ps: This patch depends on the patch "ucc_geth: use correct thread number
for 10/100Mbps link" to apply, which hasn't made to Linus' tree for now
but has already been in Jeff and David's trees.
> ---
>
> This is a regression as fixed PHYs works in 2.6.23 and I am
> using it.
>
> drivers/net/ucc_geth.c | 53
> +++++++++++++++++++++++++++--------------------
> 1 files changed, 30 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
> index ecc5712..18c8b39 100644
> --- a/drivers/net/ucc_geth.c
> +++ b/drivers/net/ucc_geth.c
> @@ -3836,6 +3836,7 @@ static int ucc_geth_probe(struct
> of_device* ofdev, const struct of_device_id *ma
> struct device_node *phy;
> int err, ucc_num, max_speed = 0;
> const phandle *ph;
> + const u32 *fixed_link;
> const unsigned int *prop;
> const char *sprop;
> const void *mac_addr;
> @@ -3926,18 +3927,38 @@ static int ucc_geth_probe(struct
> of_device* ofdev, const struct of_device_id *ma
>
> ug_info->uf_info.regs = res.start;
> ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
> + fixed_link = of_get_property(np, "fixed-link", NULL);
> + if (fixed_link) {
> + ug_info->mdio_bus = 0;
> + ug_info->phy_address = fixed_link[0];
> + phy = NULL;
> + } else {
> + ph = of_get_property(np, "phy-handle", NULL);
> + phy = of_find_node_by_phandle(*ph);
>
> - ph = of_get_property(np, "phy-handle", NULL);
> - phy = of_find_node_by_phandle(*ph);
> + if (phy == NULL)
> + return -ENODEV;
>
> - if (phy == NULL)
> - return -ENODEV;
> + /* set the PHY address */
> + prop = of_get_property(phy, "reg", NULL);
> + if (prop == NULL)
> + return -1;
> + ug_info->phy_address = *prop;
> +
> + /* Set the bus id */
> + mdio = of_get_parent(phy);
> +
> + if (mdio == NULL)
> + return -1;
>
> - /* set the PHY address */
> - prop = of_get_property(phy, "reg", NULL);
> - if (prop == NULL)
> - return -1;
> - ug_info->phy_address = *prop;
> + err = of_address_to_resource(mdio, 0, &res);
> + of_node_put(mdio);
> +
> + if (err)
> + return -1;
> +
> + ug_info->mdio_bus = res.start;
> + }
>
> /* get the phy interface type, or default to MII */
> prop = of_get_property(np, "phy-connection-type", NULL);
> @@ -3982,20 +4003,6 @@ static int ucc_geth_probe(struct
> of_device* ofdev, const struct of_device_id *ma
> ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
> }
>
> - /* Set the bus id */
> - mdio = of_get_parent(phy);
> -
> - if (mdio == NULL)
> - return -1;
> -
> - err = of_address_to_resource(mdio, 0, &res);
> - of_node_put(mdio);
> -
> - if (err)
> - return -1;
> -
> - ug_info->mdio_bus = res.start;
> -
> if (netif_msg_probe(&debug))
> printk(KERN_INFO "ucc_geth: UCC%1d at 0x%8x
> (irq = %d) \n",
> ug_info->uf_info.ucc_num + 1,
> ug_info->uf_info.regs,
> --
> 1.5.4.3
>
>
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
