>From the data sheet: "The OPB BUS clock frequency must be greater than or equal to 65 MHz for 100 Mbs Ethernet operation and greater than or equal to 6.5 Mhz for 10 Mbs Ethernet operation"
Steve > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:linuxppc-embedded- > [EMAIL PROTECTED] On Behalf Of Qin Lin > Sent: Tuesday, March 18, 2008 10:27 PM > To: [email protected] > Subject: Re: XUPV2P board opb_emac cannot work with linux-2.6-xlnx > > > Hi,All > > I found out what the problem was from. > When i set the Bus clock frequency to 50MHz and Processor clock Frequency > 200MHz, opb_ethernet does not work with the driver. > > And i check the driver,don't find the code base on the frequency . Anyone > knows the reason? > > > > -- > View this message in context: http://www.nabble.com/XUPV2P-board-opb_emac-cannot-work-with-linux-2.6- > xlnx-tp16089631p16137363.html > Sent from the linuxppc-embedded mailing list archive at Nabble.com. > > _______________________________________________ > Linuxppc-embedded mailing list > [email protected] > https://ozlabs.org/mailman/listinfo/linuxppc-embedded _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
