Hi,
I''ve ported u-boot-1.1.1 sucessfully on my IBM STBx25xx rewood6 platform
(ppc405 core). Earlier in the ppcboot I used to load the zImage.treeboot
directly via the bootloader and it used to relocate and run.
But with u-boot which image I should use and which address I should load the
image. My board has 64 MB of RAM and out of which 32 MB is mapped at 0x0000000
and another 32MB is mapped at 0xA0000000. The U-boot code is located at
0x1fe2000 in RAM.
Also is there any 2.6 kernel source supporting redwood6 IBM STBx25xx platform.
Thanx in advance.
Regards,
Akhilesh
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
