As Grant Likely said I downloaded the last release of linux kernel (2.6.24). How can I configure the kernel for XUP v II P ? Which are the minimal required configuration for a simple test? I just want to check if the ppc405 is booting the kernel image.
Thanks ! On Mon, 25 Feb 2008 13:05:19 -0700, "Grant Likely" <[EMAIL PROTECTED]> wrote: > On Mon, Feb 25, 2008 at 12:05 PM, rodolfo <[EMAIL PROTECTED]> wrote: >> Hey everybody, >> >> I'm in trouble; >> >> 1) The EDK flow: I set the OS in the Software Plataform Settings to >> linux_2_6 version 1.00.a. after that, in OS and Library section I have > to >> fill out the fields "memory size" , "connected_periphs" , "ramdisk > size" >> ... ? How would I do it ? >> >> 2) Do I place xparametera_ml300.h in > /opt/ELDK/ppc_4xx/usr/src/linux-2.6.15 >> ? if not where? > > You should download a current release of the linux kernel. Don't use > the one that comes with ELDK. > > in arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h. If you're > using the ml403 reference design, it is already there. If you're > using a custom design then you'll need to replace it. > > See here for hints: > > http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex > >> 3) I downloaded "ppc-2006-01-11.iso" from denx (ELDK) website and I'm >> trying to follow their instructions for ppc 4xx plataform. >> [ website: http://www.denx.de/wiki/view/DULG/ELDK ] > > This is an old release of ELDK. You should probably move up to a more > recent release. > >> >> In /opt/ELDK/ppc_4xx/usr/src/u-boot-1.1.4/ I do: >> >> "make distclen" and "make ml300_config" are ok! After "make all" in > I've >> got an error: >> >> a - ppc_longjmp.o >> a - ppc_setjmp.o >> a - stubs.o >> make[1]: *** No rules for processing the target `hello_world.srec', > needed >> by `all'. Stop. --> note: "TRANSLATION FROM PORTUGESE" >> make[1]: Exiting `/opt/ELDK/ppc_4xx/usr/src/u-boot-1.1.4/examples' >> make: ** [examples] Error 2 > > You're using an ancient copy of u-boot that breaks with certain > versions of the 'make' program. You should try using a recent release > of u-boot. Alternately, you can hack the u-boot makefile to not build > the examples directory. > > Cheers, > g. > > -- > Grant Likely, B.Sc., P.Eng. > Secret Lab Technologies Ltd. > _______________________________________________ > Linuxppc-embedded mailing list > [email protected] > https://ozlabs.org/mailman/listinfo/linuxppc-embedded _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
