On Fri, 01 Feb 2008 12:52:25 -0600 Steven Hein <[EMAIL PROTECTED]> wrote:
> The one main difference in this board is how eth0 is wired. > We have a Broadcom GbE switch part, and UCC1 eth is wired > directly to that switch (no PHY). (This where I needed to sounds like you ran into some h/w errata. if on rgmii, you might want to find a way to program the switch for rgmii with internal delay (8360 rev.2 rgmii-id rx & tx; 8360rev2.1 rgmii-rxid (i.e. for rx only)). If not, I'd contact fsl tech support directly. Kim _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
