This adds a fallback and calls abort() (in head_fsl_booke.S) to be able
to successfully reset some older freescale devices (i.e. mpc8540)
which don't have a RSTCR register.
Robert, this should also fix your issues. Please test.
Kumar, please ACK/NACK the patch since you touched fsl_rstcr_restart()
last time (2007-10-04). Maybe the call to abort (which resets the processor via
the Debug Control Register 0) could be put somewhere else or
we create another entry for the device tree.
Otherwise, I would prefer to check the PVR/SVR registers and use
a suitable cpu_reset() call which fits to the current cpu.
Regards,
--
Clemens Koller
__________________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
Add a fallback to abort() call (in head_fsl_booke.S) to be able to
successfully reset some older freescale power devices (i.e. mpc8540)
which don't have a rstcr register.
Signed-off-by: Clemens Koller <[EMAIL PROTECTED]>
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 3ace747..6fe674a 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -42,6 +42,7 @@
extern void init_fcc_ioports(struct fs_platform_info*);
extern void init_fec_ioports(struct fs_platform_info*);
extern void init_smc_ioports(struct fs_uart_platform_info*);
+extern void abort(void);
static phys_addr_t immrbase = -1;
phys_addr_t get_immrbase(void)
@@ -1336,6 +1337,8 @@ void fsl_rstcr_restart(char *cmd)
if (rstcr)
/* set reset control register */
out_be32(rstcr, 0x2); /* HRESET_REQ */
+ else
+ abort();
while (1) ;
}
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
