Ah, just found the problem in old postings i've to use the 'a' Version of the IP-Core :)
Georg Clemens Koller wrote: > schardt schrieb: >> First, many many thanks to Grant. My VirtexII Demo Board ist running a >> 2.6. Linux :)) >> >> But now, i switched to a Virtex4-Board with Ethernet (Mini Module from >> Avnet) >> This will i used in my application, if i can handle it. :) >> >> Linux is up and running, the ethernet is detected as eth0, link led >> is on >> but, and thats the problem, speed negotiating das not work. > > Check the PHY configuration (i.e. the bootstrap pins on the PHY). > > And - if appropriate - read out the PHY configuration (MDIO) and see > if it's correct. > > Regards, ----------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------- Forschungszentrum Jülich GmbH 52425 Jülich Sitz der Gesellschaft: Jülich Eingetragen im Handelsregister des Amtsgerichts Düren Nr. HR B 3498 Vorsitzende des Aufsichtsrats: MinDirig'in Bärbel Brumme-Bothe Vorstand: Prof. Dr. Achim Bachem (Vorsitzender), Dr. Ulrich Krafft (stellv. Vorsitzender) ----------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------- _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
