Hello everybody, I continue the work of ThomasB to get a linux kernel 2.6.19 up and running on a PPC750FX based platform using a GT-64260. From Thomas I got a patched mv643xx_eth driver which is ported to support the 64260, too. Now the driver is integrated and runs complete through initialisation bringing up an eth0 device. The initialisation seams to be ok (no error messages), the device is up and routing information is setup. Now I try to ping a remote station but I receive nothing and I get no feedback from the remote compter. As soon as I turn of the net interface (ifconfig eth0 down) I get the message "Tx time out or no link?) Is there anything else I can check? Any idea what may cause this problem?
Thanks a lot for your help Joachim _______________________________________________________________________________________________________________________ Der Inhalt dieser E-Mail ist für den Absender rechtlich nicht verbindlich. Informieren Sie uns bitte, wenn Sie diese E-Mail fälschlicherweise erhalten haben (Fax: +49-69-5805-1399). Bitte löschen Sie in diesem Fall die Nachricht. Jede Form der weiteren Benutzung ist untersagt. The content of this e-mail is not legally binding upon the sender. If this e-mail was transmitted to you by error, then please inform us accordingly (Fax: +49-69-5805-1399). In such case you are requested to erase the message. Any use of such e-mail message is strictly prohibited.
_______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
