Hey:
Recently I'm doing some project on Xilinx Ml410 evaluation board.The first
step is porting linux 2.6 to ml410,but I got some problems on this,and my
project cann't proceed,so I come to you for some help.
I use the linux kernel source tree download from
http://git.secretlab.ca/git/linux-2.6-virtex.git (The latest one).Add the file
the xparameters.h,xparameter_ml40x.h. Then add
arch/ppc/platforms/4xx/xilinx_generic_ppc.c(Use the patch I get here),and
change it's name to ml40x.c,then I make some necessay change of the
configuration files to accept selecting a Ml40x type board.Then compile the
kernel,and get the image file from arch/ppc/boot/images, (On kernel
compiling,the only device driver I sellect is " 8250/16550 and compatible
serial support ").After that I download the zImage.elf file to the target
board,and run it.But there is no output from the serial port at all.Am I doing
somthing wrong?I really don't know goes wrong.
Can anyone here help me with this?Any help from you is appreciated.Thank
you very much!
woyuzhilei
2007-08-24
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
