Hi Mustafa, > Hi all, > [...] > > My pci driver is able to scan pci bus and find succesfully the pci > device. After this point, pci_enable_device function returns > following error: > > PCI: Device 00:18.0 not available because of resource collisions >
Which ELDK and kernel do you use? I had the same problem on this board with a PLX9054 based PCI card on a 2.4.25 kernel. I switched to the 2.6 kernel and the 4.1 ELDK and the card was scanned correctly. But keep in mind that the linux PLX drivers do not work out of the box with a big endian platform like the MPC5200. Although there is a BIG_ENDIAN flag in the makefiles there are still some places left in the driver code which have to be patched (the parts with int64 adresses). It's not so easy to compile the PLX drivers on the 4.1 ELDK because of missing headers in the ppc architecture. I managed to build the drivers for the 2.6.19 kernel and I was able to work with the card except the DMA routines (still working on this issue). Hope this helps. Bye, -- Dipl. Ing. Oliver Rutsch _______________________________________________ Linuxppc-embedded mailing list [email protected] https://ozlabs.org/mailman/listinfo/linuxppc-embedded
