Hi!
On 10/08/07 11:51 +0200, Domen Puncer wrote:
> Index: work-powerpc.git/arch/powerpc/boot/dts/lite5200b.dts
> ===================================================================
> --- work-powerpc.git.orig/arch/powerpc/boot/dts/lite5200b.dts
> +++ work-powerpc.git/arch/powerpc/boot/dts/lite5200b.dts
> + [EMAIL PROTECTED] {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + device_type = "mdio";
> + compatible = "mpc5200b-fec-phy";
> + reg = <3000 400>; // fec range, since we need to
> setup fec interrupts
> + interrupts = <2 5 0>; // these are for "mii command
> finished", not link changes & co.
> + interrupt-parent = <&mpc5200_pic>;
> +
> + phy0:[EMAIL PROTECTED] {
> + device_type = "ethernet-phy";
> + reg = <0>;
> + };
> };
I am struggling with this part on Efika.
I would like to add this to the device tree from
fixup_device_tree_efika() (arch/powerpc/kernel/prom_init.c).
AFAICS client-services doesn't offer anything like new-device,
so I guess "interpret" or "call-method" will have to be used.
I have read some docs, but I'm still wandering in the dark.
Can I please get an example?
Pretty please with a cherry on top?
Domen
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
