> -----Original Message-----
> From: Kumar Gala [mailto:[EMAIL PROTECTED]
> Sent: Monday, August 13, 2007 10:10 PM
> To: [EMAIL PROTECTED]
> Cc: [email protected]
> Subject: Re: [PATCH] [UPDATED] tsec: Allow Ten Bit Interface to be
> configurable
>
>
> On Aug 13, 2007, at 5:37 PM, Joe Hamman wrote:
>
> > Allow the address of the Ten Bit Interface (TBI) to be changed in the
> > event of a conflict with another device.
> >
> > Signed-off by: Joe Hamman <[EMAIL PROTECTED]>
> > ---
> >
> > Please ignore the last patch - I missed a cut & paste error on the
> > range
> > that my testing didn't catch.
>
> I think we'd rather this came from the device tree.
>
Duh, that makes sense ;-)
Has there been any discussion yet? Maybe something like this:
[EMAIL PROTECTED] {
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
phy0: [EMAIL PROTECTED] {
interrupt-parent = <&mpic>;
interrupts = <a 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: [EMAIL PROTECTED] {
interrupt-parent = <&mpic>;
interrupts = <a 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: [EMAIL PROTECTED] {
interrupt-parent = <&mpic>;
interrupts = <a 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: [EMAIL PROTECTED] {
interrupt-parent = <&mpic>;
interrupts = <a 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi: [EMAIL PROTECTED] {
reg = <1f>;
device_type = "ethernet-tbi";
};
};
Thanks,
Joe
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
