Hello All, I am using the SELF package from Denx (Linux version 2.4.4 kernel combined with a ramdisk). I have modified the bd_info struct to be the same as ppcboot's. Also, I have the mpcbdm adaptor and am starting it with an mpc_init file tailored for a TQM board even though I have an MBX860 board. After getting the board to stop at "start_here" inside the file ./arch/ppc/kernel/head_8xx.S, the debugger output displays this:
0xc0002190 <start_here>: I!I!I!fnmadd. f31,f31,f31,f31 I have verified that the uncompressing of the kernel image is OK by inspecting the disassembly around address 0x2190 (physical address for the "start_here" function). I load the combined kernel and initrd images (pMulti) at RAM address 0x200000 via a serial connection and then from ppcboot do the command "bootm 200000". The output that is displayed stops after "Transferring control to Linux...". Any suggestions? TIA, Norm ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
