David Woodhouse wrote: >On Thu, 2004-07-01 at 12:10 -0700, Mark A. Greer wrote: > > >>FYI, look at the "PCI P2P Configuration" register >>(MV64x60_PCI[01]_P2P_CONFIG (0x1d14/0x1d94)). Apparently your firmware >>sets the device number of your hoses to 3 for some reason (default is 0 >>for PCI, 0x1f for PCI-X). >> >> > >Aha -- that's what I spent my last quarter of an hour at work yesterday >looking for in the documentation. Thanks. > >I made mv64x60_get_type() read the register in question and query the >correct device for ident. > k
> >Here's what I have working at the moment -- sorry, it's a bit untidy >still but the weekend calls... :) > heh > >Don't look too hard at the board code yet; it's still a hacked up hybrid >of your ev64260 code and the timesys 2.4 port. > Okay, I skimmed it an saw what you did. I'll take a closer on Tues but 64x60 changes look okay (I'm assuming your gen550 & serial changes aren't meant to go into this tree). I just pushed an updated mpsc driver that works okay for me. Well...the first port does; the second port hangs the system but its good enough to allow me to work on my 64360 boards. I will fix the second port. Thanks for the patch & have a good weekend. Mark ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
