Hi , thanks for your attentins. I am not an expert, but i know the meanings of programming of the board , ppcboot(bootloader) , kernel , linux, ELDK(I have compiled it for my board), driver , service , and i am familiar with MPC8260 as a microprocessor.I was working on hardware of this board. we made a copy , a customized copy.
now i am working on software , i am going to make my custom SBC8260 standalone , so i need to replace the ppcboot of the board with a bootable linux image. I want this linux to mount the flash, and then i put my own final program on the flash , and as a service, linux will run the program on any reset.(now,it would be standalone) so i cannot hold the ppcboot (u-boot) on the flash, i need the changes in my linux image , or using a linux driver. Can you please guide me through this process? If I have to replace ppcboot , how can have bootloader? (I know board needs bootloader anyway , but i don't know what it is. is it ppcboot? or ELDK makes a bootable linux?) Any other point of view is really wellcome. Best Regards. Yahoo! Mail is new and improved - Check it out! http://promotions.yahoo.com/new_mail ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
