Ole Andreas Torvmark <ole.torvmark at radionor.no> writes: > ifconfig eth0 0.0.0.0 > ifconfig eth1 0.0.0.0 > brctl addbr br0 > brctl addif br0 eth0 > brctl addif br0 eth1 > ifconfig br0 192.168.0.222 netmask 255.255.255.0 > > If I connect a machine to port 0 (eth0) then I can ping the bridge > from that machine, > > If I connect a machine to port 1 (eth1) I cannot ping the bridge. > If I connect machines to both ports, I cannot ping one machine from > the other, the only thing i can successfully ping is from port 0 to > bridge and from bridge to port 0 > > Is this a known problem with the FCC ENET driver or does it support > bridging fully ?
Have you made sure that eth0 and eth1 are 'up'? eg) ifconfig eth0 up. I'm not sure, but br0 may need to be up as well.
