In message <8D4C69676E66D511A1CB00508BBBB1921BCF0C at ranmx1.ran.harris.com>
you wrote:
>
> I've tried to use the enet over the LXT905. Tx seems to work, but I'm not able
> to receive data from it.
> I've measured the rxd, rclk and rena pins (the RENA signal is aktive high),
> but
> they seems to be ok too.
>
> But I get no rx interrupt, the scc_enet_interrupt is never called when
> receiving
> data.
Checked the pin configuration and the clock routing?
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
There's another way to survive. Mutual trust -- and help.
-- Kirk, "Day of the Dove", stardate unknown
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
