Here: http://source.mvista.com/~ank/paulus-powerpc/20060309/ is an StGIT patchset against 516450179454de9e689e0a53ed8f34b896e8651c branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
virtex-ppc_sys_devices-fix.patch - is the same fix posted by Grant Likely few days ago (only formatting is different), ppc32_xilinx_edk_temac.patch - the low level code from EDK-7.1i used by the this driver ppc32_xilinx_edk_temac_mods.patch - few modifications to EDK-7.1i code to get rid of compiling the xparameters.h #defines into the driver. These mods should not be needed after EDK-8.1 SP2 is released. ppc32_xilinx_temac.patch - the linux driver itself ppc32_xilinx_ml403_temac.patch - modifications to the ML403 platform code to add TEMAC. temac.paulus-powerpc.20060309.tgz - all the patches put together into a tarball (just in case). temac.config - .config used. This is not the final version yet (no MII support; SGDMA is operational, but seems to need some additional work). And I would probably wait for EDK-8.1 SP2 (up to one month or so) where both the TEMAC IP and the EDK code should be updated. But it would be nice to know if there is anything to rework in the current code to get the driver accepted into linux/kernel/git/paulus/powerpc.git or linux/kernel/git/torvalds/linux-2.6.git tree. And probably someone could start playing with the current driver now. At least I was able to mount the root over NFS and to run several netperf tests. Thanks, Andrei
