VLAN is supported by gianfar on 8541 the same way it is supported in other ethernet devices without hardware VLAN support. The only support it has is that it doesn't drop the frames. All the detection is done by the software. You may need to change the MTU (by +4) to make sure that full-size frames don't get dropped. I have tested VLAN on 8540, and it worked just fine.
On Mar 3, 2006, at 13:27, Bizhan Gholikhamseh ((bgholikh)) wrote: > Hi All, > We are using custom board 8541 based processor, running Linux > version 2.6.11. > In our board, the TSEC interface is connected to a BCM switch chip. > We need to configure the interface to support VLAN . The TSEC > hardware has no VLAN support and the current driver, gianfar.c, has > no support for VLAN either. Are there any implementation of > gianfar.c which supports VLAN? > > Many thanks in advance, > Bizhan > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded at ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded
