Andrew,
The PHY interrupt for the DM9121 PHY connected to the FEC ethernet port
does not work on the MPC8540 ADS board. If we tell the driver that the
PHY does not have an interrupt the FEC works properly on the MPC8540 ADS
board.
Signed-off-by: Roy Zang
Signed-off-by: Kumar Gala <kumar.gala at freescale.com>
---
diff -Nru a/arch/ppc/platforms/85xx/mpc8540_ads.c
b/arch/ppc/platforms/85xx/mpc8540_ads.c
--- a/arch/ppc/platforms/85xx/mpc8540_ads.c 2005-03-16 01:08:48 -06:00
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c 2005-03-16 01:08:48 -06:00
@@ -109,7 +109,7 @@
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->board_flags = 0;
pdata->interruptPHY = MPC85xx_IRQ_EXT5;
pdata->phyid = 3;
/* fixup phy address */
