Wright, David wrote: > I've been trying to get an Intel eepro100 card working on a > Walnut board. I've tried both the 1.09 and 1.19 versions of > the driver (eepro100.c). Initially, both failed the self- > test step. I was able to get past that one by invalidating > the dcache after issuing the self-test directive. However, > I now find that the card is neither transmitting nor receiving > reliably. I get messages like: > > eth1: Unknown receiver error, status=0x5048. [lots of these] > > and > > eth1: Transmit timed out: status 0050 0000 at 2/8 commands 00a00300 > 00a003000. > eth1: Restarting the chip... > eth1: Command unit failed to mark command 00030000 as complete at 6. > > > Any suggestions (other than junking this card, which is not an option > for me) most welcome. > > -- David Wright, InfiniSwitch Corp. > > > >
Yes, What kernel version are you using? and what is the openbios version ? armin ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
