Yes, I tried both with and without the console= argument, selecting ttyS0 and baud 9600. Same result.
>>> Wolfgang Denk <wd at denx.de> 08/04/04 05:03PM >>> In message <s1110fc4.060 at gateway.p-com.com> you wrote: > > I am using U-boot to boot linux kernel on the IBM Bubinga (405EP board). > Using kernel version 2.6.7, which has a default config file for this board. > Changed the board info structure to match u-boot's board information > structure. Using the mkimage utilit PLEASE don't use such long lines. Press ENTER after some 60...70 characters or so. > ach_dep calls output some messages. This tells me that code reaches in > start_kernel, however, after console_init, the serial port dies. I assume > this is because we initialize the serial port, and turn off early debug. I > commented o Did you pass some "console=..." boot argument? Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de One difference between a man and a machine is that a machine is quiet when well oiled. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
