Currently, ACE file generation under Solaris is not supported. Please use a Linux machine or a Windows machine to generate the ACE file.
- Peter Andreas Weder wrote: >I'm trying to build a ace file to boot linux on a ml300-board. I have >the system.bit and the linux kernel zImage.embedded. > >Documentation told me to do this: >xmd genace.tcl -hw implementation/system.bit -elf zImage.embedded -board >ml300 -ace out.ace > >This doesn't work. Genace.tcl aborted with the message that it can't generate >the svf-file for the kernel. (Doesn't work for smaller files like >hello_gpio.elf ...) >Problem is the xconnect command in genace.tcl. It does nothing (I don't >get any return value) and generation fails. I tried to exchange >xconnect with the (new?) ppcconnect command --> same result. >Why do I have to use xconnect/ppcconnect to generate a svf file from elf >file? >Does the ML300 Board have to be connected to the computer I use to execute >genace.tcl? (Not possible in my case ...) > >Board: ML300 >OS: solaris 2.8 >EDK: 6.2 >PPC-Kernel: 2.4.18 > >cu >Andreas Weder > > > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
