In message <HCFD2H$Ir2UEt49Zg3kPckloUwpF3NOg_PNxkgldEQziM49VK at bol.com.br> you wrote: > > I'm new to bdiGDB and I'm facing some problems with it. I've got a > bdiGDB for a 82xx PPC and I've correctly updated its firmware and > configured it through the RS232 interface, specifying its IP address, > my host IP, bla bla bla. But when I try to communicate through the > ethernet, by a telnet section, it doesn't seem to respond at all. ... > IP Addr : 192.168.0.2 > Subnet : 255.255.255.255
Try setting a valis subnet mask, like 255.255.255.0 > - Do I need to have my target conected to bdi in order to > stabilish the telnet connection? No. > - What about the tftp server, does it have to be running at > this point? Yes, or the BDI2000 will not be able to load the board config file and the register description file. But it will allow a telnet connection, and complain if the TFTP server does not work. > - What services are provided by the bdi? Telnet on TCP port 23? Yes. > ICMP also? And what about the debugger, does it listen to At least it will reply to ping. > port 2001? Yes. > - How can I get it running? See above: netmask. > Well, sorry by flooding the list with this newbie and OT message 8) And > of course, I'd appreciate some help. You are welcome. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de "A complex system that works is invariably found to have evolved from a simple system that worked." - John Gall, _Systemantics_ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
