On Thu, Mar 06, 2003 at 07:30:51AM -0700, Rahul Dev wrote: > > Dear all, > > I m using ads m8260 board and trying to run linux2.5.9 over it. [snip] > On analyzing , i found that the ramdisk image was loaded properly at > 0xa00000, > but in the function "identify_ramdisk_image()" when i try to read the > first block from > /dev/initrd, i could read only 16 bytes correctly, rest all bytes are > junk. > Can anybody please point out why am i read only first 16 bytes > correctly from /dev/initrd.
Don't use 2.5.9. If you really must have 2.5, use the current 2.5. And it's quite probable that you want to be using 2.4.* anyhow. -- Tom Rini http://gate.crashing.org/~trini/ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
