Dear Kate, in message <40D6ECB0.6040301 at iti.fi> you wrote: > > Small notice about Coral-P card. Least one that i have needs separate -12V to > connec to PCI > connector pins. There is no -12V supply on board. The Coral-P does itself > need > -12V but there is one analog mux in video output that needs -5V that is > generated from -12V.
Are you really sure? Maybe it was just an issue of finding the right jumper settings (which is non-trivial). We tested both with Rev. 4.0 and Rev. 5.0 cards, and didn't need -12V. > It looks a like that wery ccommon problem is that many board needs some > +/-12V > event thay should not. There are worse things; I toasted a LITE5200 with a simple 2x serial card which claims to be a Multi Voltage card but routes +5V on V_I/O ... Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de Conscious is when you are aware of something, and conscience is when you wish you weren't. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
