Dear all:
I use ELDK 3.1.1, kernel 2.4.25 on my HD860 board, using NFS. I add a
"ext2.img" as mentioned in the ELDK doc.
But I found that the "dd if=/dev/zero of=swapfile bs=1M count=62" is not easy
to executed:
The system is often no response after execute this command. On several time,
it add swap successfully.
But when I start to compile package. The system then no response !!
How to slove the problem? Is the reason of my hard disk? I think not,
thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20050812/1bb598f6/attachment.htm
