hi, when you read the output I have pasted there you can see the following (also in my origninal mail) eth0: IBM emac, MAC 00:00:00:00:00:00
eth0: Found Generic MII PHY (0x00) eth1: IBM emac, MAC 00:00:00:00:00:00 eth1: Found Generic MII PHY (0x01) I think that this MAC addresses are crap (sorry if not formulated clearly enough for you ;) am I wrong ? cheers, peter > -----Original Message----- > From: Josh Boyer [mailto:jwboyer at jdub.homelinux.org] > Sent: Montag, 19. September 2005 15:42 > To: Peter Fercher > Cc: benh at kernel.crashing.org; linux-ppc-embedded > Subject: Re: emac driver broken in 2.6.12.2 ? > > > On Mon, 2005-09-19 at 15:37 +0200, Peter Fercher wrote: > > hi, > > > > i have problems with the IBM EMAC with 2.6.12.2 (the driver worked > > with 2.4.25) running on ppc405EP octobus board. Cross > compiled on x86 > > using the eldk-3.1 toolchain > > > > any hints ? > > I think you'd need to be more explicit about what "problems" > means. Hard to give hints with what you have here. > > josh > > > hi, i have problems with the IBM EMAC with 2.6.12.2 (the driver worked with 2.4.25) running on ppc405EP octobus board. Cross compiled on x86 using the eldk-3.1 toolchain any hints ? emac: IBM EMAC Ethernet driver, version 2.0 Maintained by Benjamin Herrenschmidt <benh at kernel.crashing.org> eth0: IBM emac, MAC 00:00:00:00:00:00 eth0: Found Generic MII PHY (0x00) eth1: IBM emac, MAC 00:00:00:00:00:00 eth1: Found Generic MII PHY (0x01) cheers, peter --------------------------------------------------------- Supercomputing Systems AG phone: +41 (0)43 456 16 31 Peter Fercher fax: +41 (0)43 456 16 10 Technoparkstrasse 1 email: peter.fercher at scs.ch CH-8005 Zuerich url: http://www.scs.ch ---------------------------------------------------------
