On Fri, May 24, 2002 at 09:14:21PM -0400, Rajappa Iyer wrote: > > I'm having problems with the PCI-PCI bridge (DEC 21154) on the MCP750 > and would appreciate any words of wisdom. Basically, this bridge does > not get initialized and therefore no devices are probed on the > secondary bus. > > I've tried all three kernel trees from source.mvista.com > (linuxppc_2_4, linuxppc_2_4_devel and linuxppc_2_5). The devel branch > does not get past the Bogomips calibration loop. The other two do not > initialize the bridge. > > Any ideas on how to fix this?
Use _devel and start with the pplus port. 'make pplus_config' Although code still exists for the PowerPlus architecture boards within the legacy PReP port, it isn't maintained for those boards (except maybe for MTX). Regards, -- Matt Porter porter at cox.net This is Linux Country. On a quiet night, you can hear Windows reboot. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
