In message <40294AD9.1070407 at 246tNt.com> you wrote: > > I've just received the motorola eval board ( one, with 64M SDR and 16Mb > flash). And I'm a little lost. > I've tool u-boot sources from CVS compiled them ( compiled fine exect > for the samples apps ), then took the appropriate kernel sources, build > it ( make uImage ). And .... then ?
Either use the default configuration of U-Boot and replace dBUG, or use the "LOWBOOT" configuration and install U-Boot at the start of the flash area. Then use U-Boot to load and boot Linux. > I haven't found any "manual" or so. There is the DULG - there is no LITE5200 specific version of the document (yet), but it should get you started. See http://www.denx.de/twiki/bin/view/DULG/Manual Best regards, Wolfgang Denk -- See us @ Embedded World, Nuremberg, Feb 17 - 19, Hall 12.0 Booth 440 Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de If you hear an onion ring, answer it. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
