Hi,
I found that ADS8260 board enables PHY by the following lines of code
#ifndef CONFIG_ADS8260
/* Enable the PHY.
*/
*(volatile uint *)(BCSR_ADDR + 4) &= ~BCSR1_FETHIEN;
*(volatile uint *)(BCSR_ADDR + 4) |= BCSR1_FETH_RST;
#endif
Our board does not have BCSR. My question is how to enable PHY for MPC8260
based customs board without BCSR?
Thanks,
Batsayan Das
Tata Consultancy Services Limited
Mailto: batsayan.das at tcs.com
Website: http://www.tcs.com
Notice: The information contained in this e-mail message and/or attachments to
it may contain confidential or privileged information. If you are not the
intended recipient, any dissemination, use, review, distribution, printing or
copying of the information contained in this e-mail message and/or attachments
to it are strictly prohibited. If you have received this communication in
error, please notify us by reply e-mail or telephone and immediately and
permanently delete the message and any attachments. Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060106/8701df92/attachment.htm
