Hi list, I have some initial troubles with the MPC8540ADS that are probably FAQ, but I did not find in the list archives.
1st, whats the correlation between PVR and "Revision"? My PVR is 0x80200010, the BDI firmware says Target CPU : MPC8560/8540 Rev.1, while u-boot/doc/README.mpc85xxads reads: "MPC85xx Rev 1 Chip, in general you will use a Rev2 chip from Nov.2003. If you still see this definition while you have a Rev2(and newer) chip,undef this." So what Rev do I have? Booby traps on the way? 2nd, how to correctly setup the BDI flash access? bdi-8540>unlock 0xFF000000 # Writing to workspace failed I've taken the sections from ads8560.cfg that seem to map L2SRAM for that purpose and use WORKSPACE 0xf0000000. Some working [INIT]-Lines? 3rd, some reset-trouble with the BDI. It seems I have to do reset run g reset run every time to reset the board, otherwise it stays dead :( Not necessary on manual reset and powerup. Thanks, -- Stefan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
