I'm trying to work with FCCs on my PowerQuick III with a MPC8560 Rev 1, and I'm having quite a difficult time attempting to get the FCC ethernet ports to work.
The GigE (TSEC) ports work just fine, but the FCC ports don't seem to TX or RX anything. No IRQs from the FCC, but I get IRQs from the PHYs Switch settings: SW4: 1-4 ON, 5-8 OFF SW10: 1 ON, 2-6 OFF, 7-8 ON SW13: 1 OFF, 2-3 ON J23,J22: MII(std) J27,J31: MII I have also verified that both of the FCC PHY's on the MII bus are visible (at PHY IDs 2 and 3). Has anyone had any success with the MPC8560ADS and FCCs? In either Linux or u-boot? -- Jason McMullan <jason.mcmullan at timesys.com> TimeSys Corporation ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
