>>>>> Markus Westergren writes:
Markus> Hi, I'm working on a project which will use hardware based
Markus> on Analogue & Micro Adder875 module together with Linux 2.4.
Markus> I use RedBoot as bootloader and kernel 2.4.27-pre1, both
Markus> came with the Adder module.
Markus> The project require:
Markus> - dual ethernet support with AM79C874 PHY
Markus> The driver I've found (fec.c) only supports one
Markus> ethernet. I'v started
Markus> modifying a newer version of this driver which have
Markus> support for my PHY. I have made some progress but it's
Markus> not working yet. Found out that the first FEC is used to
Markus> communicate with both PHY's. Both devices are detected
Markus> correctly and the first seems to work but the second
Markus> hangs the kernel when the first packet is sent or
Markus> received.
Markus> - SPI support
Markus> Have found a simple driver (cpm_spi.c), which I have not
Markus> tested yet.
Markus> - PCMCIA support
Markus> Will try to modify the m8xx_pcmcia driver.
Markus> Not required but would be good to have:
Markus> - USB host support
Markus> Have no clue where to start looking.
Markus> Have anyone used this module together with Linux and are
Markus> there working drivers for it? Any tips/ideas?
Arabella Linux supports all these. Not sure how you are going to use
PCMCIA on this specific board - it's not connected.
--
========================================================================
Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader
yuli at arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel
========================================================================
